Sign-in-China.com
Online Wholesale for AD & Signage Products
Learn More >>
- 22 -
VI. Laminating Process
6.1 Lamination Principles
6.2 Operation
Lamination is an experienced and more technical work. Starters should be under guidance
of an experienced technician. Following is laminating instruction.
Pre-heating
1.
Rise the top roller and take off the pressure board.
2. Turn on the machine, press running switch, speed at 1.
3.
Turn on heating, the set up temperature is 40°C (104°F) for cold lamination film. Turn off
the roller rotating when reach the temperature.
4. Put the film roll on the shaft, insert the shaft to side bracket. Pull out several meters
by hand and make sure some tension on the shaft. Adjust the friction by side wheel if
needed.
5.
Wrap the film around roller and idler bar according to the diagram. Be careful that the
film should be with tension on and even.
6.
Slit the film to separate with liner at suitable place, and reveal the liner to put it on the
film rewind shaft.
