manualshive.com logo in svg

Qomo QIT600F3, Руководство пользователя, Страница: 17 / 19

Поделиться
Скачать
Qomo QIT600F3 Скачать руководство пользователя страница 17

17

Display
Problems

No image shows:

1.The power indicator light
is not on.

2.The power indicator light

is red.

1.Turn on the tablet. If still no image, turn off the power and turn on again

after a few minutes.

2. Try to connect the input signal

“No Signal” tip shows

This tip will appear when there is no signal input even if the display is
working properly. The following steps need to be checked:
1.Whether the computer has been turned on

2.Whether the signal cable is connected properly

3.Switch the input signal

4.Turn off the power and turn it on again

The screen is too bright or
too dark

Set“Brightness” and “Contrast” in the setup menu (refers to “Color
setting”).(The backlight of LCD screen has a certain life time. If the
screen dims or flicker, please contact support)

There are

green/red/blue/white or
dark dots on the screen

This is a nature of LCD panel, not a fault.

Fringes appear on screen,
and cannot be removed by

pressing.

Try to display a whole white or black image on the screen

Other

Problems

No sound

Check if USB-Type B is properly connected to the computer
Check if the computer volume is set to “0”
Check the settings of computer and the software used to play audio files

The unit that connects by
USB does not work

Check whether the USB cable is properly connected
Connect it to other USB ports on the computer
Restart the computer
Check if the computer and operating system are compatible with USB
Update to the latest USB 3.0 driver
Contact QOMO support if above ways can not solve your problem

Chapter 4. References

4-1. Use of USB Extension Port (Universal Serial Bus)

There is a USB hub built in the product. The expansion port can be connected to the peripheral

by connecting to the computer that compatible with USB.

This product is compatible with USB 3.0. High-speed data communication can be achieved by

connecting to the peripheral compatible with USB 3.0 (only when the USB cable supports USB
3.0).

Required System Environment:

Computer and USB port
USB3.0 cable

Notes:

Содержание QIT600F3




















Отзывы:

Нет отзывов