8
Basic Operation
Power on
Power the interactive touch screen with the 100V-240V 50Hz/60Hz AC power supply.
Connect the panel to the power supply. Switch on the rocker switch (on the left bottom of the
rear of the panel, next to the power port) to enter the standby status. The power indicator turns red.
Press power switch on the control panel or Power on the remote control to turn on the display
and built-in PC simultaneously. The power indicator turns green.
Power off
Press
ECO
on the control panel to temporarily turn off the display.
Press power switch on the control panel or Power on the remote control to enter the standby
status. The power indicator turns red.
In the standby status, switch off the rocker switch to turn off the touch screen.
1. Disconnect the touch screen from power after the touch screen enters standby status.
Otherwise, the screen may be damaged. A sudden power failure may damage the touch
screen.
2. Frequent power on and off in a short time may cause faults.
Status of the power indicator is as follows:
Power Indicator
Status
No light
Power off
Red
Standby
Green
Power on
