3
Installation
Bearing
If the product is installed in a wall-mounted way, the bearing capacity of the surface for installation must be at least
four times of the weight of the product. If the surface for installation is a wall or the ceiling of a building, the
surface must be made of solid bricks, concrete or other materials with equal intensity. If the product is installed on
a surface made of loose material such as an old brick wall, wood plank wall, solid brick wall, a metal or non-metal
structure surface, or a surface with a thick decoration layer, take necessary consolidating measures to ensure that
the product is stably installed.
Note: When the product is installed in a wall-mounted way, the screws need to be installed deeper than 10 mm
in the wall. Do not block ventilation vents.
Wall-mounting
Use a level to locate the holes in a horizontal
line and mark with pencil where the holes will
be located. Then drill holes in the wall.
Level
Insert wall plugs into the mounting holes.
Push the self-tapping screws through the
bracket into the wall plugs and tighten the
screws.
All manuals and user guides at all-guides.com
