The input format of projector’s control code is as follows:
a. If the data is in the numerical value format, please input data
directly, block them off with comma, do not distinguish lowercase and
uppercase.
For example: the “POWER ON” code in Hitachi projector manual is :
BE EF 03 06 00
BA D2
01 00
00 60
01 00
In the POWRE ON box,Input : be, ef, 03, 06, 00, ba, d2, 01, 00, 00,
60, 01, 00. Then use the same input rule to input other code.
b. If the data is in the character string format, input ‘character string’.
For example: the “POWER ON” code in the SHARP C40/50 projector
manual is :
P
O W
E - - - 1
（
“-“ is space
，
is enter.
）
In the POWER ON box, input ’POWR 1’, 0d, 0a
(Remarks: There are 3 spaces after POWER, 0d, 0a is enter.)
Input other codes in the same way.
c. If the data is in the numerical value and character format, then
synthesize the above-mentioned formats.
3)
．
Once done, click “Add” to add your projector model, then Click
“Send”. Afterward, click “Ok”. Now, you can use the visualizer to
control your projector.
4. Connect the visualizer’s projector control port to the RS232 port
with a RS232 cable
（
Please disconnect the computer from the RS232
22
