Qnubu ProLion Hydraulic 20T, Руководство пользователя

Страница: 6 / 8

USE AN ALLEN KEY
TO LOOSEN THE SAFETY
RESPIRATOR AND CHECK THAT
AIR ENTERS INTO THE SYSTEM.
1
2
INSERT THE
CRANK AND FIX IT
WITH THE
CLAMPING SCREW.
Increase
button
Set button Decrease
button
Countdown
button
-Countdown:
After closing the plates, press the
countdown start button.
-Temperature setting:
Press the SET button 1 time, the display shows “SP”, then use the
buttons to increase or decrease.
-Time settings:
Press the SET button 1 time, the display shows “ST”, then use the
buttons to increase or decrease the pressing time.
-Confirm settings:
After finishing setting the time and temperature you
must press SET again to confirm settings.
The plates will start to heat up
DO NOT FORCE THE PRESS!
IF YOU TRY TO APPLY MORE PRESSURE
MAY DAMAGE THE PRODUCT.
ENGLISH
CONFIGURATION
QNUBU
TEMPERATURE & TIME SETTING:
RESPIRATOR SETTING: CRANK INSTALLATION:
TIME
TEMPERATURE
HOME SCREEN CONF. TEMP. CONF. TIME
IMPOR
TANT
INITIAL SETUP:
AD
JU
STMENT BEF
ORE U
SING
THE MA
CHINE