QNO QMP1005G, Руководство пользователя

Страница: 5 / 25

1.5 Installation
This switch can be placed on your desktop directly, or mounted on the wall. Please refer to the
instructions for installation.
Before installing the switch, we recommend:
1. The switch is placed with appropriate ventilation environment. A minimum 25 mm space around
the unit is recommended.
2. The switch and the relevant components are away from sources of electrical noise such as
radios, transmitters and broadband amplifiers
3. The switch is away from environments beyond recommend moisture
Desktop Installation
1. Install the switch on a level surface that can support the weight of the unit and the relevant
components.
2. Plug the switch with the power cable of adaptor and plug the power adaptor to the power outlet.
Wall-mount Installation
The switch may be standalone, or mounted on wall. Wall mounting facilitate to an orderly
installation when you are going to install series of networking devices.
Procedures to Wall-mount the switch:
1. Screw the two screws provided with your Switch into the wall. Use screws with 6 mm ~ 8 mm (0.24" ~ 0.31") wide
heads. Do not screw the screws all the way in to the wall; leave a small gap between the head of the screw and the
wall.
2. Align the holes on the back of the Switch with the screws on the wall. Hang the Switch on the screws.
Note:
The Switch should be wall-mounted horizontally. The Switch's side panels with ventilation slots
should not be facing up or down as this position is less safe.
Installing Network Cables
1. Crossover or straight-through cable: All the ports on the switch support Auto-MDI/MDI-X
functionality. Both straight-through or crossover cables can be used as the media to connect the
switch with PCs as well as other devices like switches, hubs or router.