QNO FQR8030, Руководство пользователя

Страница: 45 / 149

2WAN 4LAN Medium Scale Multi-WAN QoS Router
42
Configuring Assigned Routing Mode for Load Balance Mode
IP Group: This function allows users to assign packets from specific Intranet IPs or to
specific destination Service Ports and to specific destination IPs through an assigned WAN
to the Internet. After being assigned, the specific WAN will only support those assigned
Intranet IPs, destination Service Ports, or destination IPs. Those which are not configured
will go through other WANs for external connection. Only when this mode is collocated with
“Assigned Routing” can it bring the function into full play.
Example 1: How do I set up the Assigned Routing Mode to keep all Intranet IPs
from going through WAN2 when the destination is Port 80, and keep all other
services from going through WAN1?
As in the figure below, select “HTTP[TCP/80~80]” from the pull-down option list
“Service”, and then in the boxes of “Source IP” input “192.168.1.0 ~ 0” (which means to
include all Intranet IP addresses). Retain the original numbers “0.0.0.0” in the boxes of
“Destination IP” (Which means to include all Internet IP addresses). Select WAN2 from the
pull-down option list “Interface”, and then click “Enable”. Finally, click “Add New” and the
rule will be added to the mode. After the rule is set up, only packets that go to Port 80 will
be transmitted through WAN2, while other traffic will be transmitted through WAN1.