manualshive.com logo in svg

QNAP TVS-h 88X Series, Руководство пользователя

Поделиться
Скачать
QNAP TVS-h 88X Series Скачать руководство пользователя страница 38

Installing Expansion Cards

The device supports selected expansion cards, some of which require QNAP PCIe brackets. QNAP-branded
expansion cards purchased from the company website are shipped with the brackets necessary to fit the
device.

Warning

•

Moving fan blades:

 Keep your hands and other body parts away from moving fan

blades.

•

Other moving components:

 Keep your hands and other body parts away from other

moving components.

• Observe electrostatic discharge (ESD) procedures to avoid damage to components.

1.

Check the expansion cards and brackets supported by your model on the QNAP website.

a.

Go to 

www.qnap.com/compatibility

.

b.

Click 

Search by NAS

.

c.

Specify the number of bays and the specific model of your NAS.

d.

Under 

Category

, select the component or device type.

e.

Locate a specific component or device model in the list.

f.

Click the corresponding 

Note

 icon to view more information.

2.

Power off the device.

3.

Disconnect the power cord from the electrical outlet.

4.

Disconnect all cables and external attachments.

5.

Remove the case cover.

a.

Loosen the screws.

b.

Slide the cover back.

c.

Lift the cover off the device. 

TVS-hx88X User Guide

Installation and Configuration   

37

Содержание TVS-h 88X Series

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды