Note
• The myQNAPcloud device name is used when remotely accessing the NAS.
• For security purposes, the CloudLink remote connection service will be disabled on your
NAS after initialization. You can enable it by connecting to QTS through LAN and then
installing CloudLink.
7.
Click
Next
.
The
Smart Installation Guide
opens in the default web browser.
8.
Click
Start Smart Installation Guide
.
9.
Specify the following information.
•
NAS name
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
•
Password
: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
10.
Click
Next
.
11.
Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
12.
Click
Next
.
13.
Select
Obtain an IP address automatically (DHCP)
.
14.
Click
Next
.
15.
Select the types of devices that you will use to access shared folders on the NAS.
16.
Click
Next
.
17.
Review the settings.
18.
Click
Apply
.
A confirmation message appears.
Warning
Clicking
Confirm
deletes all data on the drive before installing QTS.
19.
Click
Confirm
.
QTS is installed.
Installing QTS Using an HDMI Connection
Warning
Installing QTS deletes all data on the drives. Back up your data before proceeding.
1.
Connect an HDMI display to the NAS.
2.
Connect a USB keyboard to the NAS or prepare the QNAP IR remote control (not available on all
models).
TVS-x72XT User Guide
Installation and Configuration
41
