1.
Connect the expansion unit to the NAS.
a.
Connect the USB cable to the USB Type-B or USB Type-C port on the expansion unit.
b.
Connect the USB cable to a USB 3.2 Gen 1 Type-A port on the NAS.
2.
Power on the expansion units.
3.
Verify that the expansion units are recognized by the NAS.
a.
Log on to QTS as administrator.
b.
Go to
Main Menu
>
Storage & Snapshots
>
Overview
>
System
.
c.
Verify that the expansion units are listed.
QuTS hero Installation
The TS-h2490FU uses the QNAP QuTS hero operating system. You can install QuTS hero using any of the
following methods.
TS-h2490FU User Guide
Installation and Configuration
30
