QNAP TS-h1886XU-RP Скачать руководство пользователя страница 7

Страница: 7 / 60

Component

TS-h1886XU-RP-D1622-32GB

Buttons

• Power

• Reset

Dimensions
Form factor

2U Rackmount

Dimensions (H x W x D)

88.3 x 482 x 549.7 mm
(3.48 x 18.98 x 21.64 in)

Net weight

12.73 kg (28.06 lbs)

Others
Rail compatibility

RAIL-B02

Note

• Rail kits are not included with the NAS and must

be purchased separately. For details, contact an
authorized reseller or go to

http://shop.qnap.com

• Information on rail kit installation can be found in

the installation guide included in the rail kit
package.

Power supply unit

TS-h1886XU-RP: 2 x 550W, 100-240V AC, 50/60 Hz

System battery

CR2032 lithium battery (3V, 225 mAh)

Sound level

56.9 dB(A)

Note

The sound level was tested at a bystander position,
which is within one meter of the NAS. The test NAS
operated at low speed with the maximum number of
drives installed.

Fans

System: 3 x 60 mm, 12V DC fans

Operating temperature

0˚C to 40˚C (32˚F to 104˚F)

Relative humidity

• Non-condensing relative humidity: 5% to 95%

• Wet-bulb temperature: 27˚C (80.6˚F)

Tip

For the list of compatible drive models and expansion cards, go to

https://www.qnap.com/

compatibility

Package Contents

Item

Quantity

TS-h1886XU-RP NAS

Power cord

Ethernet cable

2 x 1GbE (Cat5e)

Screws for 3.5-inch drives

Screws for 2.5-inch drives

Quick Installation Guide (QIG)

TS-h1886XU-RP User Guide

Product Overview

Содержание TS-h1886XU-RP





























































Результаты поиска

Содержание TS-h1886XU-RP

Отзывы:

Похожие инструкции для TS-h1886XU-RP

Бренды по названию

Популярные бренды

QNAP TS-h1886XU-RP, Руководство пользователя

Результаты поиска

Содержание TS-h1886XU-RP

Отзывы:

Похожие инструкции для TS-h1886XU-RP

Бренды по названию

Популярные бренды