manualshive.com logo in svg

QNAP TS-h1683XU-RP Series, Руководство пользователя

Поделиться
Скачать
QNAP TS-h1683XU-RP Series Скачать руководство пользователя страница 36

Important

The QNAP QXP host bus adapter is required for connecting the SATA JBOD enclosure to a host

device. Third-party host bus adapters are not compatible with QNAP JBOD enclosures.

For details, see 

Replacing Expansion Cards

.

3. Connect the expansion units to the NAS using the following topology. 

Note

This image shows connecting the NAS to a TL-R400S and TL-R1200S-RP.

4. Power on the SATA JBOD expansion units.

5. Power on the NAS.

6. Verify that the expansion units are recognized by the NAS.

a. Log on to QuTS hero as administrator.

b. Go to Main Menu > Storage & Snapshots > Overview > System .

c. Verify that the expansion units are listed.

Connecting USB Expansion Units

To connect the device to USB expansion units, USB Type-A to USB Type-C cables or USB Type-C to USB Type-C

cables are required.

For required accessories details, see 

Expansion Unit Installation

.

1. Connect the expansion unit to the NAS.

TS-hx83XU-RP User Guide

Installation and Configuration   

35

Содержание TS-h1683XU-RP Series
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды