manualshive.com logo in svg

QNAP TS-h 90FU Series, Руководство пользователя

Поделиться
Скачать
QNAP TS-h 90FU Series Скачать руководство пользователя страница 16

Installation Requirements

Category

Item

Environment

• Room temperature: 0˚C to 40˚C (32˚F to 104˚F)

• Non-condensing relative humidity: 5% to 95%

• Wet-bulb temperature: 27˚C (80.6˚F)

• Flat, anti-static surface without exposure to direct sunlight, liquids,

or chemicals

• Free from objects that may obstruct NAS ventilation or apply

pressure to the NAS or power cord

Hardware and peripherals

• Storage drives

For the list of compatible drive models, go to 

https://

www.qnap.com/compatibility

.

• Network cable

Tools

• Phillips #1 or #2 screwdriver

• Anti-static wrist strap

Setting Up the NAS

Important

Read all safety requirements and information carefully before setting up the NAS or

installing NAS components.

1. Place your NAS device in an environment that meets the requirements. 

For details, see 

Installation Requirements

.

2. Install drives. 

For details, see 

Installing 2.5-inch Solid-state Drives on 2.5-inch Trays

.

For a list of compatible drives and expansion cards, go to 

http://www.qnap.com/compatibility

.

3. Optional: Install expansion cards. 

For details, see the following topics:

•

Replacing Expansion Cards on the TS-h2490FU

•

Installing Expansion Cards on the TS-h1090FU

4. Optional: Connect expansion units. 

For details, see the following topics:

•

Connecting SAS Expansion Units

.

•

Connecting USB Expansion Units

.

5. Connect the power cord and all applicable cables.

6. Power on the NAS. 

For details, see 

Front Panel

.

7. Install QuTS hero. 

For details, see 

QuTS hero Installation

.

TS-hx90FU User Guide

Product Overview   

15

Содержание TS-h 90FU Series












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды