11.
Specify the following information.
•
NAS name
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
•
Password
: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
12.
Click
Next
.
13.
Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
14.
Click
Next
.
15.
Select
Obtain an IP address automatically (DHCP)
.
16.
Click
Next
.
17.
Select the types of devices that you will use to access shared folders on the NAS.
18.
Click
Next
.
19.
Configure the disk settings.
a.
Select a volume type.
b.
Select the disks that you want to use to create a RAID group.
c.
Optional: Select a RAID type.
Note
The
Smart Installation Guide
automatically selects the optimal RAID type based on the
number of the selected disks.
d.
Optional: Select
Encrypted Disk Volume
and
Bad Block Scan
.
20.
Click
Next
.
21.
Review the settings.
22.
Click
Apply
.
A confirmation message appears.
Warning
Clicking
Confirm
deletes all data on the drive before installing QTS.
23.
Click
Confirm
.
QTS is installed.
TS-832X User Guide
Installation and Configuration
25
