QNAP TS-73AeU Series Скачать руководство пользователя страница 40

Страница: 40 / 70

Method

Description

Requirements

Qfinder Pro

installation

(Recommended)

If the NAS is connected to your local area

network, you can do the following:

• Locate the NAS using Qfinder Pro.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see

Installing QTS Using

Qfinder Pro

• Computer

• Network cable

• Qfinder Pro installer

Cloud installation

If the NAS is connected to the internet,

you can do the following:

• Scan the QR code on the NAS.

• Log into your myQNAPcloud account.

• Use myQNAPcloud Link to remotely

access your NAS.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see

Installing QTS Using the

Cloud Key

• Computer or mobile device

• Network cable

• myQNAPcloud account

• Cloud Key

You can also install the QNAP QuTS hero operating system. If your NAS is connected to the internet, the

option to install QuTS hero will appear in the Smart Installation Guide wizard using any of the methods in

the table. You can also manually download the QuTS hero firmware from

https://download.qnap.com

Warning

QuTS hero and QTS use different file systems. Switching operating systems will reset the

NAS and delete all data.

Installing QTS Using Qfinder Pro

Warning

Installing QTS deletes all data on the drives. Back up your data before proceeding.

Important

To protect your NAS from brute force attacks, create a new system administrator account

during QTS installation to disable the default "admin" account.

1. Power on the NAS.

2. Connect the NAS to your local area network.

3. Run Qfinder Pro on a computer that is connected to the same local area network.

Note

To download Qfinder Pro, go to

https://www.qnap.com/utilities

4. Click Next.

The QNAP Warranty Service page opens in the default web browser.

5. Click Check warranty.

TS-x73AeU User Guide

Installation and Configuration

Содержание TS-73AeU Series







































































Результаты поиска

Содержание TS-73AeU Series

Отзывы:

Похожие инструкции для TS-73AeU Series

Бренды по названию

Популярные бренды

QNAP TS-73AeU Series, Руководство пользователя

Результаты поиска

Содержание TS-73AeU Series

Отзывы:

Похожие инструкции для TS-73AeU Series

Бренды по названию

Популярные бренды