6.
Specify the myQNAPcloud device name for the NAS.
Note
• The myQNAPcloud device name is used when remotely accessing the NAS.
• For security purposes, the myQNAPcloud Link remote connection service will be disabled
on your NAS after initialization. You can enable it by connecting to QTS through LAN and
then installing myQNAPcloud Link.
7.
Click
Next
.
The
Smart Installation Guide
opens in the default web browser.
8.
Click
Start Smart Installation Guide
.
9.
Specify the following information.
•
NAS name
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
•
Password
: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
10.
Click
Next
.
The
Set the date and time
screen appears.
11.
Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
12.
Click
Next
.
The
Configure the network settings
screen appears.
13.
Select
Obtain an IP address automatically (DHCP)
.
14.
Click
Next
.
The
Cross-platform file transfer service
screen appears.
15.
Select the types of devices that you will use to access shared folders on the NAS.
16.
Click
Next
.
The
Summary
screen appears.
17.
Review the settings.
18.
Click
Apply
.
A confirmation message appears.
Warning
Clicking
Confirm
deletes all data on the drive before installing QTS.
19.
Click
Confirm
.
QTS is installed.
TS-x73A User Guide
Installation and Configuration
48
