background image

Component

TS-131K

TS-231K

TS-431K

System battery

CR2032 lithium battery (3V, 225 mAh)

Warning

To avoid potential battery explosion, causing injury or damage
to components, ensure that you replace the existing battery
with a battery of the same type.

Important

Dispose of used batteries according to local regulations or the
instructions of the battery manufacturer.

Sound level

16.0 db(A)

22.1 db(A)

23.2 db(A)

Note

The sound level was tested at a bystander position, which is
within one meter of the NAS. The test NAS operated at low
speed with the maximum number of drives installed.

Fans

System: 1 x 50mm, 12V
DC smart fan

System: 1 x 70mm, 12V
DC smart fan

System: 1 x 120 mm,
12V DC smart fan

Warning

To avoid potential injury or damage to components, do not
touch the fans while the NAS is connected to a power source.

Operating temperature

0˚C to 40˚C (32˚F to 104˚F)

Relative humidity

• Non-condensing relative humidity: 5% to 95%

• Wet-bulb temperature: 27˚C (80.6˚F)

Security slot

Kensington security slot

Components

Front Panel

TS-131K

TS-x31K User Guide

Product Overview   

6

Содержание TS- 31K Series












































Отзывы: