QNAP TS-1253BU Скачать руководство пользователя

Страница: 35 / 56

QTS Installation

The TS-x53BU uses the QNAP QTS operating system. You can install QTS using any of the following
methods.

Method

Description

Requirements

Qfinder Pro
installation
(Recommended)

If the NAS is connected to your local area
network, you can do the following:

• Locate the NAS using Qfinder Pro.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see

Installing QTS Using

Qfinder Pro

• Computer

• Network cable

• Qfinder Pro installer

Cloud installation

If the NAS is connected to the internet,
you can do the following:

• Scan the QR code on the NAS.

• Log into your myQNAPcloud account.

• Use CloudLink to remotely access

your NAS.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see

Installing QTS Using the

Cloud Key

• Computer or mobile device

• Network cable

• myQNAPcloud account

• CloudKey

Local installation

If the NAS supports HDMI output, you can
do the following:

• Connect the NAS to the required

hardware.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see

Installing QTS Using an

HDMI Connection

• Monitor

• HDMI cable

• USB keyboard or remote control (not

available on all models)

Installing QTS Using Qfinder Pro

Warning

Installing QTS deletes all data on the drives. Back up your data before proceeding.

Power on the NAS.

Connect the NAS to your local area network.

Run Qfinder Pro on a computer that is connected to the same local area network.

Note

To download Qfinder Pro, go to

https://www.qnap.com/utilities

TS-x53BU User Guide

Installation and Configuration

Содержание TS-1253BU

























































Результаты поиска

Содержание TS-1253BU

Отзывы:

Похожие инструкции для TS-1253BU

Бренды по названию

Популярные бренды

QNAP TS-1253BU, Руководство пользователя

Результаты поиска

Содержание TS-1253BU

Отзывы:

Похожие инструкции для TS-1253BU

Бренды по названию

Популярные бренды