QNAP TS-110, Руководство пользователя программного обеспечения

Страница: 77 / 369

77
LUN Enabled The LUN is active for connection
and is visible to authenticated
initiators.
Disabled The LUN is inactive and is invisible
to the initiators.
B utto
n
Na m e De s c ription
Deactiva
te
Deactivate a ready or connected target. Note that the
connection from the initiators will be removed.
Activate Activate an offline target.
Modify Modify the target settings: target alias, CHAP information,
and checksum settings.
Modify the LUN settings: LUN allocation, name, disk volume
directory, etc.
Delete Delete an iSCSI target. All the connections will be removed.
Disable Disable an LUN. All the connections will be removed.
Enable Enable an LUN.
Unmap Unmap the LUN from the target. You must disable the LUN
before unmapping it. When you click this button, the LUN
will be moved to "Un-Mapped iSCSI LUN List".
Map Map the LUN to an iSCSI target. This option is only available
on the "Un-Mapped iSCSI LUN List".
View View the connection status of an iSCSI target.
Switc hing LUN M a pping
Note : The following information only applies to ARM-based NAS models with
firmware version 3.3.0 or la te r and x86-based NAS models running firmware
version 3.2.0 or la te r .
Follow the steps below to switch the mapping of an iSCSI LUN.