12
Chapter 2.
Power Button and Reset Button Behavior
Power button: Press to turn on or turn off.
System
Power button
(Turn on)
Power button
(Hardware turn
off)
Power button
(Force turn off)
All models
Press once
1.5 sec
5 sec
Reset button: Press to reset the system settings.
System
Basic system reset
(1 beep)
Advanced system reset
(2 beeps)
All models
3 sec
10 sec
Basic system reset (3 sec)
Press the reset button for 3 seconds, a beep sound will be heard. The following settings are
reset to default:
System administration password: admin
TCP/IP configuration: Obtain the IP address settings automatically via DHCP
TCP/IP configuration: Disable Jumbo Frame
TCP/IP configuration: If port trunking is enabled (dual LAN models only), the port
trunking mode will be reset to “Active Backup (Failover)”.
Содержание TES-1885U-D1531-32G
Страница 1: ...QNAP Turbo NAS TES x85U Series Hardware User Manual 2016 QNAP Systems Inc All Rights Reserved...
Страница 28: ...28 2 Install a 3 5 or 2 5 disk drive to the tray 3 Insert the drive tray into the NAS close and lock the latch...
Страница 34: ...34 4 Insert new power supply into NAS 5 Connect the power adaptor and cables to the NAS 6 Power on NAS...