QNAP QSW-M2106PR, Руководство пользователя

Страница: 18 / 48

4. QSS
About QSS
The QNAP Switch System (QSS) is a network management operating system for QNAP switch devices. QSS
allows for Layer 2 network administration and system management of the switch.
Getting Started
1. Log in to the switch as an administrator.
The default administrator account is
admin
.
For details, see Switch Access .
2. Configure the system settings.
For details, see System Settings .
3. Configure port settings and other network settings.
For details, see Network Management .
Network Management
Basic network configuration of the switch includes port management, VLAN configuration, configuration of
various protocols, and traffic management via Quality of Service (QoS) and Access Control Lists (ACLs).
Dashboard
The dashboard opens to the configuration section of the interface. Click the drop-down menu in the
dashboard to view the port status, VLAN status, link aggregation status, and port traffic for all ports.
You can also delete user-configured network settings and monitor the network settings of the switch.
Configuring Port Settings
1. Log in to QSS.
2. Go to Configuration > Port Management .
3. Go to Port Configuration.
4. Identify a port.
5. Configure the settings.
Setting Description
State Controls the operation status for a port
Speed Specifies the maximum speed at which a port can operate
Flow Control Controls the flow control status for a port
Important
Flow Control is not supported when the port speed is
set to HDX.
6. Click Save.
QSS saves the settings.
QSW-M2106PR User Guide
QSS 17