QNAP QDA-A2AR Скачать руководство пользователя страница 19

2.

This device must accept any interference received, including interference that may cause undesired
operation.

Note

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

Important

Any modifications made to this device that are not approved by QNAP Systems, Inc. may
void the authority granted to the user by the FCC to operate this equipment.

CE Notice

 This QNAP NAS complies with CE Compliance Class B.

SJ/T 11364-2006

 

本产品符合中国

RoHS

标准。以下表格标示此产品中某有毒物质的含量符合中国

RoHS

标准规定的限量要求。

本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的年限。本产品
可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些元件将会单独标示出来。

部件名称

有毒有害物质或元素

(Pb)

(Hg)

(Cd)

六价铬

(CR(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

壳体

0

0

0

0

0

0

QNAP Drive Adapter User Guide

Notices   

18

Содержание QDA-A2AR





















Отзывы: