QNAP QBoat Sunny, Руководство пользователя

Страница: 24 / 39

4. Basic Operations
This chapter describes basic QBoat operations.
Power Button
Operation User Action Result
Power on Press the button once. The QBoat powers on.
Power off Press and hold the button for 1.5
seconds. The QBoat powers off.
Force power off Press and hold the button for 5
seconds. The QBoat shuts down.
Important
Use this method only
when the QBoat is
unresponsive.
Reset Button
Operation User Action Result
Basic system reset Press and hold the
button for 3 seconds. The following settings are reset to default:
• System administrator password: admin
• TCP/IP configuration:
• Obtain IP address settings automatically via
DHCP
• Disable jumbo frames
• If port trunking is enabled (multi-LAN models
only), the port trunking mode is reset to “Active
Backup (Failover)”.
• System port: 8080 (system service port)
• Security level: Low (Allow all connections)
• VLAN: Disabled
Advanced system
reset Press and hold the
button for 15 seconds. The default factory settings are restored.
• To retrieve old data after an advanced system reset,
recreate the previous folder structure on the QBoat.
LEDs
LEDs indicate system status and related information when the QBoat is powered on. The following LED
information applies only when the drive is correctly installed and when the QBoat is connected to the
network.
For details on the location of the LEDs, see Components .
QBoat Sunny User Guide
Basic Operations 23