QNAP HS-210, Руководство пользователя программного обеспечения

Страница: 235 / 369

235
8.1.2 Remote Replication
This chapter covers the following topics:
NAS to NAS and Rsync
RTRR
Downloading Replication Job Logs
NAS to NAS a nd Rs y nc
The NAS data can be backed up to a remote NAS or Rsync server using Rsync remote
replication.
If the backup destination is a NAS, go to "Main Menu" > "Backup Station" > "Rsync
Server" and enable the remote NAS as an Rsync backup server.
1. To create a replication job, click "Create a Replication Job".
2. Specify the server type (NAS or Rsync server) of the remote server. Enter a job
name. Click "Next".
3. Enter the IP address, port number, username and password to login to the remote
server. The default port number is 873. The login username must have read/write
access to the remote server and a sufficient quota limit on the server. Click "Test"
to verify the connection, then click "Apply".
4. Specify the local folder by clicking the Source folder box. After expanding and
locating the folder, double click on it to set it as the directory where the data will
be replicated from.
5. Specify the destination folder Destination folder box. Locate the folder in the folder
tree and double click on it to set it as the directory where the data will be
replicated to. And, click "Add" to add this pair of replication folders.
235
237
242