b.
Insert the module into the slot.
c.
Verify that the metal connectors are completely inserted into the slot.
d.
Carefully press down on the module until the retention clips lock the module into place.
4.
Install the node.
For details, see
.
5.
Verify that the module is recognized by the NAS.
a.
Log on to QuTS as administrator.
b.
Go to
Control Panel
>
System
>
System Status
>
Hardware Information
.
c.
Check the value for
Total memory
.
Hot-swapping Redundant Power Supply Units
Warning
The NAS may have one or more power supply unit (PSU) cords. To avoid serious injuries,
a trained service technician must disconnect all PSU cords before installing or replacing
system components.
1.
Power off the node.
2.
Disconnect the power cord from the electrical outlet and the PSU that you are replacing.
3.
Firmly press the latch toward the handle and then pull the PSU out.
GM-1000 User Guide
Installation and Configuration
37
Содержание GM-1000
Страница 1: ...GM 1000 GM 1001 GM 1002 User Guide Document Version 1 01 07 2020 ...
Страница 3: ...VCCI Notice 52 2 ...
