QMS Crownnet, Руководство по установке

Страница: 35 / 86

Interface
Configuration
33 QMS CrownNet Setup Guide
EtherTalk Interface Configuration
1 If your network has more than one zone, use the Administra-
tion/Communications/
xxxxxxxx NIC/CrownNet/EtherTalk/
Zone Name/Zone Part 1 and Zone Part 2 menus, (where
xxxxxxxx is either Resident or Optional) to enter the name of
the zone to which the printer is attached.
» Note: The two Zone Part x menus allow you to identify 1 zone
with a name up to 32 characters long. (Up to 16 characters can
be entered in each of the two menus). You cannot use these two
menus to identify two zones. Trailing spaces are not considered
part of the zone name. All standard printable ASCII characters
are valid except the @ and ' symbols. The names are case
sensitive.
2 Skip to “Network Configuration” on page 39.
OS/2 LAN Manager/LAN Server and Microsoft
Windows Network Interface Configuration
1 One unique printer name is broadcast to the network. Use
the Administration/Communications/
xxxxxxxx NIC/Crown-
Net/LAN Manager/Printer Name menu (where xxxxxxxx is
either Resident or Optional) to enter the name of the printer.
» Note: The name can be up to 16 characters long. Spaces and
lowercase characters are not allowed. Underscore characters (_)
are allowed to simulate multiword names (for example,
PRODUCT_MKTG).
2 If you’re using OS/2 LAN Manager/LAN Server, skip to “OS/2
LAN Manager/LAN Server Network Configuration” on
page 54.
If you’re using Microsoft Windows Network, skip to “CrownNet
Print Utility for Windows Configuration” on page 39.