QMS 2060, Справочник

Страница: 90 / 210

0HPRU\
4063ULQW6\VWHP5HIHUHQFH
2 The remaining memory in K Mem for Spool is allocated to Shared
Spooling Space. This can be seen in the Communications Set-
tings & Input Buffer Sizes area of the status page.
3 The Shared Spooling Space can be allocated to any of the com-
munication interfaces if the input jobs require more spooling
space. The limit to this is the amount of Host Input (K Mem for
Spool) shown on the status page.
» Note: If you add the Input Buffer Sizes allocated to each interface and
the Shared Spooling Space, the result should equal Host Input.
3RVHDS
The K Mem for PSHeap, listed on the status page as Heap, is the
number of kilobytes of RAM dedicated to the PostScript emulation
interpreter. This memory client holds downloaded PostScript emula-
tion fonts, operators, and forms.
3RVW6FULSW)RQWV
The K Mem for PS Fonts, listed on the status page as Font Cache, is
the number of kilobytes of RAM dedicated to caching previously
scaled bitmap representations of fonts for the PostScript emulation
interpreter.
Menu Administration/Memory/Manual Config/K Mem for PSHeap
Choices 01280-no maximum
Notes If you change the K Mem for PSHeap value, the printer
automatically restarts after you save your changes and exit
from the configuration menu. The maximum value listed
depends on the amount of memory installed and whether a
hard disk is present.
Menu Administration/Memory/Manual Config/K Mem for PS Fonts
Choices 00088-05120