QMS 1660, Начало работы

Страница: 50 / 104

Macintosh
Printing
Software
QMS 1660 Print System Getting Started 3-6
4 Also in the PSExec 3. xx dialog box, choose Easy Install or
Custom Install.
n
Easy Install automatically installs all of the utilities, including
the PS Exec application; the LaserWriter 8.
x driver; the PDF,
PDX, and PPD files; and the screen fonts.
n
Custom Install allows you to choose the options you want to
install.
The amount of available space on your Macintosh hard disk
and the amount of space necessary for all of the selected
options are indicated near the bottom of the window.
» Note: If you’re using Custom Install, you can click the small
icon (it looks like an
I
inside a square) to the right of each
install option for more information about that option.
5 Click the Install button to begin the installation.
The installation takes approximately one minute. The Installer
places the LaserWriter 8.
x driver in the Extensions folder inside
the System Folder and all of the other options inside a newly cre-
ated PSExec 3.
x ƒ folder in the hard disk window. Also inside this
folder is the Installer log file, which you can view to verify the
installation.
» Note: All Macintosh users on a network must use the same
version of the LaserWriter and Laser Prep files to run correctly.
For example, if the network has a mixture of LaserWriter 6.x, 7.x,
and/or 8.x, the printer will experience frequent reinitialization
problems. To check the version number, select the LaserWriter
icon and then hold down the Command key and press the
I key.
The driver version number appears in the Info window on the
second-to-last line. LaserWriter 7.x and 8.x do not require a Laser
Prep file to work correctly with your printer. The Laser Prep
information is located within the LaserWriter driver itself.
6 When the installation is finished, you are prompted to
choose Continue to install additional options from the Cus-
tom installation option or to choose Quit to exit the Installer
program.