QMAXZ Lighting QM Series, Руководство пользователя, Страница: 28 / 41

QM series manual v3.06 ©QMAXZ 2009 - 27 -
To set or view various temp modes, use [UP] or [DOWN] buttons to select, press [MENU] to save.
Default value is normal.
MOTOR CAL
Motor calibration. Push [UP] or [DOWN] to select an off-set from +3 to -3 steps to move the gobos
and colors for precision placement. Push [MENU] to enter or [ESC] to return to menu.
CHANNEL
View fixture channel assignment, use [UP] or [DOWN] buttons to scroll, press [MENU] or [ESC] to
return.
DMX MODE
Setting DMX control to 8Bit or 16Bit, use [UP] or [DOWN] buttons to select, press [MENU] to save
Default setting is 16Bit.
RUN MODE
Setting DMX control on/off and AUTO mode, use [UP] or [DOWN] buttons to select, press [MENU] to
save. AUTO OFF> control is set to DMX input, AUTO ON MASTER> fixture runs a pre programmed
sequence, AUTO ON SLAVE> fixture follows a connected fixture that is set to AUTO ON MASTER.
Default value is AUTO OFF.
FAN MODE
Setting the FAN MODE. Push [UP] or [DOWN] to select AUTO mode, HIGH speed mode or FAN
Speed Test. When select FAN Speed Test you can run through all 20 steps of the fan speed control.
Push [MENU] to enter or [ESC] to return to menu.
SERVICE
This menu is for service centre only and is password protected. Please contact your local dealer for
details.