QLT 19C25, Инструкция по эксплуатации

Страница: 3 / 6

Product Introduction
1. HEPA
2. Dust bin
3. led Light
4. Power switch
5. Air outlet
6. Handle
7. Charging port
Parts
Instructions
1. 1. Connect the charging line or charging base to fully charge the battery.
* Indicator status:
Red: charging
Blue or green: fully charged
2. Connect the phase according to the application accessories shall be installed so that (used)
3. Gently press the power switch to start the vacuum cleaner
* It is recommended to use a 5V 2A adapter / car charger and the power adapter needs to be provided by itself
Installation and use of accessories
1. Suction nozzle:
Suitable for dust cleaning of various gaps such as doors, seats, cabinet corners, drawers, and ashtrays.
1. Brush: it has the dual functions of suction and wiping. Is is suitable for cleaning the dust on the surfaces of various cushions, foot pads, keyboards and air
outlets of air conditioners.
2. Floor brush: suitable for dust cleaning of floor, trunk, mattress, sofa and various large-area flat surfaces.
3. Blowing: it is suitable for the inflation of small equipment such as lifebuoy and balloon. It can also clean the fine dust in various gaps such as windows and
keyboards, it can be swiped and blown with a brush.
Disassembly and cleaning
1. Rotate the dust bin counterclockwise to remove the dust from the machine body.
2. Take out the HEPA filter screen in the dust bin and pour the garbage into the trash can.
3. The dust cup can be cleaned with a slightly wet rag or disposable paper towel. The filter screen can be washed with water. After washing, it should be
thoroughly dried and reused.
4. To reinstall the dustbin, put the HEPA filter screen into the dust bin, rotate and tighten in the opposite direction according to step 1.
Product Parameters
Product name Rated voltage Rated power Product Size
19C25/19140 7.4V 120W 180 * 158 * 66mm 330 gram 0.1L
Matters needing attention
1. Do not remove, repair or refill this product unless it is carried out by authorized repair personnel.
2. Do not cover the air inlet or outlet when operating this product, otherwise the product may be deformed or catch for due to overheating.
3. When using this product, do not inhale combustible, such as burning cigarette butts.
4. Please place the product property and keep it away from children.
5. Do not clean the product with severely corrosive liquids, such as Tianna water, paint, etc.
6. If the vacuum cleaner has no dust collection bin and filter screen, and is damaged or partially damaged, do not use it and replace it in time,
otherwise the product will be damaged.
7. Before charging, please ensure that the switch is turned off. It is strictly prohibited to use while charging.
Charging line
Multifunctional suction nozzle Floor brush Multifunctional air nozzle
Charging base assembly