Qlogic SANbox 5800V Series, Руководство по установке

Страница: 28 / 134

1–General Description
Chassis Controls and LEDs
1-2 59265-02 B
You can manage fabrics with the CLI, the QuickTools™ Web applet, or Enterprise
Fabric Suite™ (version 7.04).

Refer to the QLogic 5800V Series Fibre Channel Switch Command Line
Interface Guide for information about the CLI.

Refer to the QLogic 5800V Series QuickTools Switch Management User’s
Guide for information about QuickTools.

Refer to the QLogic 5800V Series Enterprise Fabric Suite User’s Guide for
information about using the Enterprise Fabric Suite application. The
Enterprise Fabric Suite CD comes with a 30-day trial license.
Chassis Controls and LEDs
The chassis LEDs provide information about the switch’s operational status.
These LEDs include the Input Power LED (green), Heartbeat LED (green), and
the System Fault LED (amber) as shown in
Figure 1-2 . The Maintenance button,
shown in Figure 1-2 , is the only chassis control, and is used to reset a switch or to
recover a disabled switch.
Figure 1-2. Chassis LEDs and Controls
To apply power to the switch, plug the power cords into the switch AC power
receptacles located on the back of the switch, and into a 100–240 VAC power
source.
Input Power LED (Green)
The Input Power LED indicates the voltage status at the switch logic circuitry.
During normal operation, this LED lights up to indicate that the switch logic
circuitry is receiving the correct DC voltages. When the switch is in maintenance
mode, this LED is not lit.
Maintenance
Button
Input Power LED
(Green)
Heartbeat LED
(Green)
System Fault LED
(Amber)