SN0058036-00 Rev B 7/05
Plug and Play Fibre Channel Switch
For a list of authorized resellers, visit www.qlogic.com/buyqlogic/home_buy.asp
Standards
Fibre Channel Ports
• Physical & Signaling Interface Rev. 4.3 (FC-PH)
• Physical & Signaling Interface-2 (FC-PH-2)
• Physical & Signaling Interface-3 (FC-PH-3)
• Fabric Generic Requirements (FC-FG)
• Generic Services (FC-GS)
• Generic Services-2 (FC-GS-2)
• Generic Services-3 (FC-GS-3)
• Switch Fabric (FC-SW-2)
• Arbitrated Loop Rev. 4.6 (FC-AL)
• Arbitrated Loop-2 Rev. 7(FC-AL-2)
• Fibre Loop Attachment (FC-FLA)
• Tape Technical Report (FC-Tape)
• Virtual Interface Architecture Mapping (FC-VI)
• Element MIB Specification
• Fibre Alliance MIB Specification
Fibre Channel Classes of Service
• Classes 2, 3 connectionless
Modes of Operation
• Fabric
• Public Loop
Performance Features
Fabric Port Speed
• 2Gb/s, full-duplex, auto-negotiating for
compatibility with existing 1-Gb devices
Fabric Latency
• Less than 0.4 µs (best case, no contention)
• Cut-through routing
Fabric Point-to-Point Bandwidth
• 412 MB/s Full Duplex per port
Fabric Aggregate Bandwidth
• Single chassis: Over 40 Gb/s (full duplex)
end-to-end
• Non-blocking architecture
Maximum Frame Sizes
• 2148 bytes (2112 byte payload)
Per-port Buffering
• ASIC-embedded memory (non-shared)
• Each port has a guaranteed 16-credit zero wait
state buffer for full performance up to10km
Scalability
Ports Per Chassis
• (10) 2Gb / 1Gb ports
Multi Switch Fabrics
• Supports E-port link to another switch
• In-order delivery of frames in all multi-switch
and multi-link configurations
Fabric Port Types
• All ports can assume the following states:
- F_port: Fabric
- FL_port: Fabric loop (public loop)
- E_port: Switch-to-switch (single connection)
• Ports are auto-discovering, self-configuring
Media Type
• Hot-pluggable, industry-standard SFPs (Small Form
Pluggable)
Supported SFP Types
• Shortwave: 500 m (1,640 ft.)
• Longwave: 10 km (6.2 mi.)
Media Transmission Ranges
• Optical
- Shortwave: 500 m (1,640 ft.)
- Longwave: 10 km (6.2 mi.)
Cable Types
• 50/62.5 micron multimode fiber optic
• 9 micron single-mode fiber optic
Interoperability
• Compatible with FC-SW-2 compliant
switches
• Management interoperability with leading
SAN management applications
Fabric Management
Management Processor
•
Pentium class Processor
Management Methods
•
Integrated with SANsurfer Express (VDS
support for leading storage providers)
• SANsurfer Switch Manager management
tools
• SNMP, Telnet, GS-3
Access Methods
•
In-band
•
Ethernet 10/100 BaseT with RJ45
Diagnostics
•
Power-up self-test of all functionality except media
modules
•
Field-selectable full self-test including media modules
Fabric Services
•
Simple Name Server
• Fabric Zoning
• Registered State Change Notification
(RSCN)
• I/O StreamGuard
User Interface
• LED indicators, command-line console, and
web-based utilities
Mechanical
Enclosure Types and Options
• Desktop/shelf top with included rubber feet
• Optional rack mounting kit for mounting up to two
SANbox 1400 units
Dimensions
• Width: 190.5 mm (7.5” )
• Height: 41.9 mm (1.65” ) (1U)
• Depth: 155.6 mm (6.125”)
Weight
• 0.9 kg (2 lbs)
©2004-2005 QLogic Corporation. All rights reserved. QLogic, SANbox and SANsurfer are registered trademarks of QLogic Corporation. The QLogic logo, SANguard, SANmark, SANbox Manager,
I/O Stream Guard and Multistage are trademarks of QLogic Corporation, which may be registered in some jurisdictions. All other brands and product names are trademarks or registered trade-
marks of their respective holders. Information supplied by QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this
brochure. QLogic Corporation reserves the right, without notice, to make changes in product design or specifications.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
W W W . Q L O G I C . C O M
E u r o p e H e a d q u a r t e r s
Q L o g i c ( U K ) LT D.
S u r r e y Te c h n o l o g y C e n t r e
4 0 O c c a m R o a d G u i l d f o r d
S u r r e y G U 2 7 Y G U K
+ 4 4 0 ( 0 ) 1 4 8 3 2 9 5 8 2 5
C o r p o r a t e H e a d q u a r t e r s
Q L o g i c C o r p o r a t i o n
2 6 6 5 0 A l i s o V i e j o P a r k wa y
A l i s o V i e j o, C A 9 2 6 5 6
9 4 9 . 3 8 9 . 6 0 0 0
T E C H N I C A L S P E C I F I C A T I O N S
Gb
2
SANbox Express
™
SANbox 1400
Series
Harmonics
• EN 61000-3-2
Immunity
• EN 55024:1998
Marking
• FCC Part 15
• UL (USA)
• TUV (USA)
• cUL (Canada)
• cTUV (Canada)
• TUV (Europe)
• VCCI
• CE
Power Supply/Cooling
• External laptop-style power supply
• Front to back airflow with integrated
cooling fan
Environmental
Operating
• Temperature:
5 to 40 °C (41 to 104°F)
• Humidity:
15% to 90% noncondensing
• Altitude:
0 to +15,000 feet
• Vibration:
IEC 68-2
5-500 Hz, random, 0.21 G rms
• Shock:
IEC 68-2
4 g, 11ms, 20repetitions
Non-Operating
• Temperature:
-40°C to 70°C (-40 to 158 °F)
• Humidity:
25% to 93% noncondensing
• Altitude:
0 to +50,000 feet
• Vibration:
IEC 68-2
5 to 500 Hz, random, 2.09 G rms,
• Shock:
IEC 68-2
30g, 292 ips, 3 repetitions, 3 axis
Electrical
Operating Voltage
• 90-265 Vac, 47-63 Hz
Power Source Loading
• 20VA
Heat Output
• 25W maximum (with full optics configuration)
Regulatory
Safety Standards:
• UL 60950 (USA)
• CSA 22.2 No.60950
(Canada)
• EN60950 (EC)
• CB Scheme-IEC 60950
Emissions Standards
• FCC Part 15B Class A
(USA)
• VCCI Class A ITE
(Japan)
• ICES-03 Issue 3
(Canada)
• EN55022 Level A (EC)
• CISR 22, Class A
Voltage Fluctuations
• EN 61000-3-3
Ordering Information
SB1403-10AS
Switch unit
SB1403-10AJ
Switch unit with 10-PAK
small form-factor pluggable
optics (SFP)
SB1400-RACKKIT
Optional rack mounting kit
(
supports up to two SANbox 1400 units)
SB1400-PS
External power supply
replacement kit
