Qlogic QLE2740L-DEL, Руководство пользователя

Страница: 97 / 135

3–Fibre Channel Configuration
Configuring CS_CTL QoS
82 BK3254601-00 C
Enabling CS_CTL QoS Mode for the Initiator and Target Ports
Figure 3-33 shows how to enable CS_CTL QoS mode for the initiator and target
ports.
Figure 3-33. Enabling CS_CTL QoS Mode
Verifying and Confirming CS_CTL Mode Setup for Each Port
Figure 3-34 shows how to verify the CS_CTL mode setup for each port.
Figure 3-34. CS_CTL Mode Setup for Each Port
Creating a Virtual Port from the Adapter’s Port in
QConvergeConsole GUI
To create a virtual port in QConvergeConsole GUI:
1. In the QConvergeConsole GUI content pane on the left, select the Host tab.
2. On the Host page, expand the adapter node, and then select a port.
3. In the content pane on the right, select the Virtual tab.
4. On the Virtual page under Create New Virtual Port , specify the Number of
vPort to create , and then click Update .
5. Click Create .