A–Troubleshooting
Troubleshooting with a Diagnostic Port (D_Port)
106
BK3254601-00 C
Verifying D_Port Mode with Interactive QConvergeConsole
CLI
To verify D_Port mode in interactive QConvergeConsole CLI:
1.
From the main menu, select the
Adapter Information
option, and then
select the adapter type (
Fibre Channel Adapter
).
2.
From the
FC Adapter Information
menu, select
2
(
FC Port Information
).
The Adapter Information menu shows the affected port with a status of
Loop
Down, Diagnostic Mo
shows an example.
Figure A-4. D_Port Mode in Interactive QConvergeConsole CLI
Verifying D_Port Mode with Noninteractive
QConvergeConsole CLI
To verify D_Port mode in noninteractive QConvergeConsole CLI, issue the
following command:
quacli -pr fc -g
