Qlogic QLA200 HBA, Руководство пользователя

Страница: 19 / 54

3 – SANsurfer HBA Install Wizard (Windows 2000/Server 2003)
Installing the Driver
FL0054601-00 B 3-3
Step 3. In the table titled 2Gb FC - QLA200 Series , click the appropriate operating
system: Windows 2000 or Windows Server 2003 . The SANblade Fibre
Channel HBA Management Software and Drivers screen displays (see
figure 3-4) .
Figure 3-4. SANblade Fibre Channel HBA Management Software and Drivers Screen
Step 4. In the table titled 2Gb FC - QLA200 Series , click Click Here to Install .
The File Download dialog box displays (see figure 3-5) .
Figure 3-5. File Download Dialog Box (Sample)
Step 5. You can run the SANsurfer HBA Install Wizard from the CD. Optionally,
you can download the wizard to the server and run it from there. Do one
of the following:
❑
Click Open or Run to run the SANsurfer HBA Install Wizard from the CD.
❑
Click Save to download the application to the computer’s hard disk. The
Save As dialog box displays. Specify a location on the hard disk, then
click Save . From that location, double-click the installation file
qlflzip.exe .
The SANsurfer HBA Install Wizard starts automatically. If the wizard does
not start and you are running the wizard from the CD, do the following:
❑
Select the drive where the SANsurfer Fibre Channel HBA Software CD
is located.
❑
In the \data\files\windows directory, double-click the installation file
qlflinst.exe .