Qlogic QConvergeConsole CLI 2400 Series, Руководство пользователя, Страница: 137 / 366

7–NIC Partitioning (NPAR) Noninteractive Commands
-eswitchstats (Display eSwitch Statistics)
SN0054667-00 C 7-3
-eswitchstats
(Display eSwitch Statistics)
To display eSwitch statistics, issue the following command:
> qaucli -npar -eswitchstats < port_inst >
where

< port_inst >
is the physical port number displayed by the
-ip
command.
-eswitchvportstats
(Display eSwitch NPAR Statistics)
To display eSwitch NPAR statistics, issue the following command:
> qaucli -npar -eswitchvportstats < func_inst >
where

< func_inst >
is the physical function number displayed by the
-if
command.
-feswitchcfg
(Change eSwitch Configuration—Physical Function)
To change eSwitch physical function configuration, issue the following command:
> qaucli -npar -feswitchcfg < func_inst > < option > < value >
where

< func_inst >
is the physical function number displayed by the
-if
command.

< option >
and <
value
> are one of the option/value pairs listed in Table 7-1 .
Table 7-1. eSwitch Physical Function Options
Option Value
discard_tagged
1 (Enable) or 0 (Disable) discard tagged configuration
mac_addr_change
1 (Enable) or 0 (Disable) MAC address change configuration
mac_anti_spoof_chk
1 (Enable) or 0 (Disable) MAC anti-spoof check
promisc_mode
1 (Enable) or 0 (Disable) promiscuous mode configuration
rx_mcast_rep
1 (Enable) or 0 (Disable) receive multicast configuration
tx_mcast_rep
1 (Enable) or 0 (Disable) transmit multicast configuration
vlan_id
VLAN ID value
vlan_filter
1 (Enable) or 0 (Disable) VLAN filter configuration
vlan_strip
1 (Enable) or 0 (Disable) VLAN stripping configuration