Qlogic InfiniPath, Инструкция по установке

Страница: 43 / 74

3 – Software Installation
Downloading and Installing InfiniPath and OpenFabrics Software
IB0056101-00 C 3-9
Q
/usr/share/man
/usr/share/doc/infinipath
/usr/share/doc/mpich-infinipath
3.5.4
Installing in an Alternate Location
The
--prefix
option can be used to specify an alternate installation location,
replacing the
/usr
prefix as noted in section 3.5.3 , above. Some files are installed
in
/etc
regardless of whether or not -
-prefix
is used.
If you install into an alternate location you should set the variable
INFINIPATH_ROOT
to the same value. See section 3.5.8.1 in the InfiniPath
Interconnect User Guide for more information on setting this environment variable.
3.5.4.1
Installing for Your Distribution
You may be using a kernel which is compatible with one of the supported
distributions, but which may not be picked during
infinipath-kernel
installation. It may also happen when using
make-install.sh
to manually
recompile the drivers.
In this case, you can set your distribution with the
$IPATH_DISTRO
override. Run
this command before installation, or before running
make-install.sh
. We use
the RHEL4 Update 4 distribution as an example in this command for
bash
or
sh
users:
$ export IPATH_DISTRO=rhel4_U4
The distribution arguments that are currently understood are found in the file
build-guards.sh
.
make-install.sh
and
build-guards.sh
are both found
in this directory:
/usr/src/infinipath/drivers
These are the arguments used for RHEL, CentOS(Rocks), and Scientific Linux.
rhel4_U2
rhel4_U3
rhel4_U4
These are the arguments used for SLES, SUSE, and Fedora:
sles10
suse9.3
fc3
fc4