Qlogic FastLinQ 3400 Series, Руководство пользователя, Страница: 267 / 287

239 83840-546-00 E
17
User Diagnostics in DOS

Introduction

System Requirements

Performing Diagnostics

Diagnostic Test Descriptions
Introduction
QLogic 8400/3400 Series User Diagnostics is an MS-DOS based application that
runs a series of diagnostic tests (see
Table 17-2 ) on the QLogic 8400/3400 Series
network adapters in your system. QLogic 8400/3400 Series User Diagnostics also
allows you to update device firmware and to view and change settings for
available adapter properties.
To run QLogic 8400/3400 Series User Diagnostics, create an MS-DOS 6.22
bootable disk containing the uediag.exe file. Next, start the system with the boot
disk in drive A. See
“Performing Diagnostics” on page 240 for further instructions
on running diagnostic tests on QLogic network adapters.
System Requirements
Operating System: MS-DOS 6.22
Software: uediag.exe