11–Fibre Channel Over Ethernet
FCoE Boot from SAN
222
83840-546-00 D
3.
In the FCoE Target Parameters window, there are eight target entries in
which you can enable the target (Connect
n
), select or type a WWPN
(WWPN
n
), and type a boot LUN number (Boot LUN
n
) (
Figure 11-8. FCoE Target Parameters Window
The first six target entries (1-6) enable you to select a WWPN from a menu.
Use the UP and DOWN arrows to select the WWPN field, and then press
ENTER. In the WWPN list, use the UP and DOWN arrows to select a
WWPN, and then press ENTER.
Figure 11-9. Selecting an FCoE WWPN
The last two target entries (7, 8) enable you to type a WWPN. In the WWPN
field, type the WWPN, and then press ENTER.
4.
Press ESC until prompted to exit and save changes.
