8–Using QLogic Control Suite
Configuring Teaming
143
83840-546-00 D
Creating a Team
1.
From the
Teams
menu, select
Create a Team
, or right-click one of the
devices in the “Unassigned Adapters” section and select
Create a Team
.
This option is not available if there are no devices listed in the “Unassigned
Adapters” sections, which means all adapters are already assigned to
teams.
2.
Click
Expert Mode
.
3.
Click the
Create Team
tab (
Figure 8-24. Expert Mode—Create a Team
NOTE
Enabling Dynamic Host Configuration Protocol (DHCP) is not recommended
for members of an SLB type of team.
NOTE
If you want to always use Expert Mode to create a team, click
Default
to Expert Mode on next start
.
