8–Using QLogic Control Suite
Managing the Network Adapter
97
83840-546-00 D
Configuration Tab: System Management
Chimney Offload State
Enable or disable chimney offload at the host level,
rather than at the device level, and then click
Apply
.
Configuration Tab: iSCSI Initiator
Name
The current IQN name is displayed. Click the IQN name to modify the
host’s iSCSI initiator name, and then click
Apply
.
Managing the Network Adapter
The installed network adapters appear one level below the host in the hierarchical
tree in the Explorer View pane. At the adapter level, you can view information and
configure parameters from the following tabs:
Information
Configuration
Viewing Adapter Information
Select the network adapter in the
Explorer View
pane, and then select the
Information
tab to view adapter-level information (
Figure 8-4. QCS Adapter Information
