Qlogic 3000 Series, Справочное руководство, Страница: 51 / 98

2–Fabric Discovery Classes
QLGC_FCSwitch : CIM_ComputerSystem
59223-03 E 2-13

11-Reset: Switch will perform a hard reset.

Job: Ignored, command is synchronous.

TimeoutPeriod, must be zero second interval, or NULL,
command is synchronous.
Returns:

0 - Success

6 - In Use: Switch is being configured by another user.

4097 - Invalid State Transition: RequestedState parameter
value is out of range.

4098 – Use of Timeout Parameter Not Supported
Request Status Codes:

CIM_ERR_ACCESS_DENIED: User does not have
authorization for this command.

CIM_ERR_INVALID_PARAMETER: One or more required
parameters are missing.

CIM_ERR_NOT_FOUND: The FCSwitch instance was not
found.
Supported WBEM Operations

getClass

getInstance

enumerateInstances

enumerateInstanceNames

modifyInstance

setProperty

invokeMethod
Associations

QLGC_FCSwitchObjectManager : CIM_HostedService
— 1to1 relationship to QLGC_ObjectManager

QLGC_FCSwitchConformsToProfile : CIM_ElementConformsToProfile
— 1to1 relationship to QLGC_RegisteredProfile

QLGC_FCSwitchConformsToSubProfile :
CIM_ElementConformsToProfile
— 1toMany relationship to QLGC_RegisteredSubProfile
(RegisteredName=”Zone Control”, “Software”, “Enhanced Zoning and
Enhanced Zoning Control”)

QLGC_FCSwitchCIMXMLCommMechanism :
CIM_HostedAccessPoint
— 1to1 relationship to QLGC_CIMXMLCommunicationsMechanism