Qlogic 3000 Series, Руководство пользователя

Страница: 96 / 114

C–Flash Update
QLogic Adapter Flash Update — Windows Server
C-4 NE0154601-00 A
Using the Flash Utility
When invoking the
nxflash.exe
utility, use the following syntax:
nxflash -i “Local Area Connection n ” --all
In this command, the
-i
indicates the interface command and the
“Local Area
Connection n ”
specifies the adapter being flashed. (The quotation marks are
required.)
To determine the adapter number:
1.
On the Start menu, right-click My Network Places .
2. Click Properties . The Network Connections window opens.
The Network Connections window lists all of the cards and the type of device to
which they are connected.
Along with the interface (
-i
in the
nxflash
command syntax), additional
commands are listed in Table C-1 .
Table C-1. Flash Utility Commands — Windows Server
Command Definition Description
-i
--interface
Interface This command specifies the interface type
(Local Area Connection 1, Local Area Con-
nection 2, etc.).
--info
Information This command prints board information such
as board type, chip revision, serial ID, firm-
ware version, BIOS version, MAC address,
etc.
-a
--all
Flash
update This command performs a complete update
of BIOS and firmware.
-a < image file >
--all < image file >
Flash
update This command performs a complete update
of BIOS and firmware using a user-renamed
ROM image.
-r < backup file >
--restore < backup
file >
Restore When an update is performed, the previous
Flash version is stored to a file in the current
working directory. Executing this command
restores the specified backup Flash version
to the QLogic adapter. Here is an example of
a backup file name:
flashbackup_[ serial num-
ber ]_[ version ]_[ date-time ]
--pxe-on
PXE This command enables PXE (default).