USER'S MANUAL
35
Adjustment of the Driving Chain
(1)Scale (2) Lock nut
After running for every 1,000 km, adjust the tightness of driving chain so that the
movable distance between the two chain sprockets is kept within 25 - 35mm.
1. Support the motorcycle with the side stand.
2. Loosen the nut of rear wheel shaft.
3. Screw out the locking nut.
4. The chain can be adjusted by turning the adjusting bolt clockwise and counterclockwise.
Note:
When a new chain is replaced, the two chain sprockets must be checked. If necessary, make replacement.
CAUTION
The opening end of chain joint should be installed in reverse to the turning
direction.
(1) Joint clip. (2) Rotating direction.
The dust and dirt on the driving chain will increase the wearing of the chain
itself and chain sprockets. Therefore, clean the driving chain with cleaning
detergent and then lubricate it using special lubricant or motor oil after riding
for every 1,000 km.
Tire
After the first 1,000 km and every 3,000 km, check the air pressure and tire tread. For the sake of safety and
20-30mm
¢Ù
¢Ú
1
2