Qlightec ST45L-USB, Инструкция по эксплуатации

Страница: 4 / 12

4 5
• Connect both USB power connector and USB signal control
connector that are connected to each other to USB ports of a PC.
• Product does not run in case of USB power connector connection only.
USB CONNECTOR
USB POWER CONNECTOR
1. Please connect USB Tower Lamp and PC as above figure <How to connect with PC>
2. Please download test program(USB.zip) from Qlight website or blog.qlight.com
3. The downloaded sample program will be saved as “USB Test Program.zip”.
When you unzip the file, there will be a file with the names below.
Test program Required library for test program
※
When developing the program, please download and refer to the file “manual and library”(sample programs and manuals
for developers).
4. When you run the “QLight lamptest_usb.exe”file, a test programs will show up as above.
Products sound options are classified as WS / WA / WM / BZ. The product will only play the sound option selected when
the order was placed.
①
Lamp Control
②
Sound Selection
④
Index
③
Sound Group Selection
USB Cable Wiring Instructions
Test Instructions
<For Connecting Method with pc> <Test program>
■ How to use program
Article Detailed specification
①
Lamp control
- ON: Lamp turns on when the button is clicked
- ON/OFF: Lamp flashes when the button is clicked
- OFF: Lamp turns off when the button is clicked
②
Sound selection
- 1ch-5ch: Has 5 sounds per model, turns on the chosen sound
- Click “Sound off” button to turn off the sound
③
Sound group selection
- WS : 5 warning sounds(mono)
- WP : 5 special warning sounds(mono)
- WM(1) : 5 Melodies(mono)
- WA(1) : 5 alarms(mono)
- WB : Software Buzzer 5 sounds(speaker type)
- Buzzer : 5 Buzzer sounds
- WM(8) : 5 Melodies(8 chord)
- WA(8) : 5 alarms(8 chord)
④
Index
- You can connect up to a maximum of 4 USB Tower lights per PC
- Must be controlled by selecting Index0 - Index3 for controlling the USB tower light. The default is set to Index0