3
Reflector
(Heat resistant ABS)
LED unit
Parts Definition/ Installation
• First, machine holes on the mounting surface.
(SKLR only)
• Remove the M4 nuts from bolts and place the product through the mounting surface holes.
(SKLR only)
•
Fasten the flange nuts(M4) on the opposite side of the mounting
surface until the product is tightened securely.
(SKLR only)
• SKMLR/ SKMPLR models have strong magnets at the base of the product that allows attachment to any metal surface.
SKLR
SKMLR/ SKMPLR
Lens
(PC)
Cigarette lighter plug
Housing
(PC)
Installation Environment and Protection Rating
•
This product is designed for use with protection rating of IP54.
•
If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP54), it may cause malfunction or damage to the product.
•
In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside-
down positions where water can potentially penetrate into the product and impact it’s operation.
•
For further information, please visit our website (www.qlight.com).
Mounting Hole Specifications
•
Machine holes on the mounting surface referring to the diagram below.
98
74
46
4-Ø5 HOLES
