4
Top Control Configuration
Volume switch
Sound switch
• Built-in sounds can be selected by using
a switch either bit or binary sounds.
• Please be conscious of the number selected
for your desired sound option.
- Switch No. 1 : Select Bit or Binary
- Switch No. 2,3,4 : Select Built-in sound group
■
Select built-in Bit sound group
■
Select built-in Bit sound group or Binary sound group
• It is being used when built-in sound is selected.
• Select between the six sound groups.
• Every group has 5 type of sounds.
• In bit input mode, Please set switch no.1
to
off(0).
• In binary input mode, Please set switch no.1
to ON(1).
How to select bit type sound group
Sounds
No.
2
3
4
1
0
0
1
5 Warning Sounds
2
0
1
0
5 Special Warning Sounds (1st Group)
3
0
1
1
5 Melodies
4
1
0
0
5 Alarms
5
1
0
1
5 Special Warning Sounds (2nd Group)
6
1
1
0
5 Special Warning Sounds (3rd Group)
ON(1)
OFF(0)
Sound Setting
• The volume output of this product is adjustable.
•
Turn the volume dial clockwise to increase the volume,
and
turn counter clockwise to decrease the volume.
•
There will be no sound when the dial is put at MIN.
Volume Adjustment
Volume Dial
VOL.
MIN.
MAX.
Bit input method sound configuration
Type of sound
(WS group as an example)
No. 1
2
3
4
5
0
0
0
0
0
0
No sound
1
1
0
0
0
0
Fire.A-ANG(560Hz-1.5kHz)
2
0
1
0
0
0
Emergency WA-U
(600Hz-1.5kHz)
3
0
0
1
0
0
Ambulance PI-PO
(450Hz-900Hz)
4
0
0
0
1
0
Machinery Fault(820Hz)
5
0
0
0
0
1
High Expansion(1kHz)
※
Please be noted that the configuration chart above is ex-
plaining how to wire terminal blocks. The actual product
does not have a switch.
ON(1)
OFF(0)
• In bit input mode, you can chooses one sound from 1
sound by configuring the 5 channels.
•
For sound configurations, refer to the table below.
■
Bit Input - Playing Built-in Sound
Sound Type and Combination Manual
