5
• To access the control panel, remove the front cover by
unscrewing the M3 bolts on the front cover.
Sound switch
Volume switch
Front Cover Removal Instructions
Front Control Configuration
• The volume output of this product is adjustable.
• Turn the volume dial clockwise to increase the volume, and
turn counter clockwise to decrease the volume.
• There will be no sound when the dial is put at MIN.
Volume Dial
Volume Adjustment
VOL.
MIN.
MAX.
• Built-in sounds can be selected by using
a switch either bit or binary sounds.
• Please be conscious of the number selected
for your desired sound option.
- Switch No. 1 : Select Bit or Binary
- Switch No. 2,3,4 : Select Built-in sound group
■
Select built-in Bit sound group
■
Select built-in Bit sound group or Binary sound group
• It is being used when built-in sound is selected.
• Select between the six sound groups.
• Every group has 5 type of sounds.
• In bit input mode, Please set switch no.1 to
off(0).
• In binary input mode, Please set switch no.1
to ON(1).
How to select bit type sound group
Sounds
No.
2
3
4
1
0
0
1
5 Warning Sounds
2
0
1
0
5 Special Warning Sounds (1st Group)
3
0
1
1
5 Melodies
4
1
0
0
5 Alarms
5
1
0
1
5 Special Warning Sounds (2nd Group)
6
1
1
0
5 Special Warning Sounds (3rd Group)
ON(1)
OFF(0)
Sound Setting
Bit input method sound configuration
Type of sound
(WS group as an example)
No. 1
2
3
4
5
0
0
0
0
0
0
No sound
1
1
0
0
0
0
Fire.A-ANG(560Hz-1.5kHz)
2
0
1
0
0
0
Emergency WA-U
(600Hz-1.5kHz)
3
0
0
1
0
0
Ambulance PI-PO
(450Hz-900Hz)
4
0
0
0
1
0
Machinery Fault(820Hz)
5
0
0
0
0
1
High Expansion(1kHz)
※
Please be noted that the configuration chart above is ex-
plaining how to wire terminal blocks. The actual product
does not have a switch.
ON(1)
OFF(0)
• In bit input mode, you can chooses one sound from 1
sound by configuring the 5 channels.
•
For sound configurations, refer to the table below.
■
Bit Input - Playing Built-in Sound
Sound Type and Combination Manual