Qlight SNES, Руководство пользователя

Страница: 4 / 8

4
• Please use an M4 bolt at the location marked in the diagram
above to ground the product.
• When connecting the grounding cable, please use a ring terminal.
• Please use a grounding cable with a diameter greater than 4mm.
①
②
①
Grounding Instructions
4-Ø9 HOLES
114
114
Mounting Hole Specifications
• Machine holes on the mounting surface referring
to the diagram below.
Installation Environment and Protection Rating
• This product is designed to be explosion proof.
• Please make sure to use the product in an environment that meets the specified explosion proof rating and regulations.
• For further information, please visit our website (http://www.qlight.com).
Assemble bulb
Disassemble bulb
■
Xenon Bulb Replacement Instructions(SNES-S only)
Bulb/ Xenon Bulb Replacement Instructions
• Please wait at least 30 minutes after turning off the power before
replacing the xenon bulb.
• Please pull out the entire xenon bulb structure
①
to disassemble
while pushing the hook down.
• For xenon bulb assembly, please push down the connector
portion of the xenon bulb structure to the connector pin
location
②
until it makes “clark” sound.
• Please wait at least
1
minute after turning off the power
before replacing the bulb.
• In order to dissemble the bulb, please push down the bulb (
①
)
lightly and screw it counterclockwise.
• In order to put the bulb in to the unit, please place the bulb (
①
)
in the socket(
②
) and screw it clockwise while lightly pushing
down the bulb.
Assemble bulb
Disassemble bulb
■
Bulb Replacement Instructions(SNES only)
①
②
M4 ground contact part
Terminal Box Wiring Instructions
• Terminal block is located inside of the product. Unscrew the 4 bolts located in
the upper body to get rid of the upper lighting element of the unit.
• Please apply fork (U-type) or ring (O-type) locking spade terminal at naked tip
of the wire for secure connection.
• Please wire the power line to terminal
①.
• For AC type products, wire regardless of polarity.
• For DC type products, wire terminal of black line to (-) polarity.
• External power line - UL1015 AWG18(0.75sq) x 2C 400mm.
• Once the unit is powered on, light and buzzer are working simultaneously.
※
Applicable cable range : AWG16-AWG22